products

Acrylic Decorative Finishes Waterborne metal finishes environmentally friendly.

short description:

Waterborne metal finishes
Product Description This product is made of special propionic acid emulsion, anti-feather cai filler, various functional aids and deionized water, is the best alternative to traditional solvent-based steel structure paints.
Features Low VOC emission, use water as diluent, environmentally friendly.
The paint stock has good water resistance, fast drying speed and easy construction.
4. Waterborne metal finishes
Product Description This product is made of special propionic acid emulsion, anti-feather cai filler, various functional aids and deionized water, is the best alternative to traditional solvent-based steel structure paints.
Features Low VOC emission, use water as diluent, environmentally friendly.
The paint stock has good water resistance, fast drying speed and easy construction.
4. Good adhesion to steel substrates and excellent physical and mechanical properties after drying of paint film.
Recommended use It is suitable for light anti-win and rust proofing of all kinds of steel structure, including large steel structure, outdoor steel structure, metal fence, all kinds of cast iron parts and other metal products. Including large steel structures, outdoor steel components, metal fences for net frame communities, all kinds of cast iron parts and other metal products, etc., can also be used for maintenance repair protective primer. and mechanical properties after drying of paint film.
Recommended use It is suitable for light anti-win and rust proofing of all kinds of steel structure, including large steel structure, outdoor steel structure, metal fence, all kinds of cast iron parts and other metal products. Including large steel structures, outdoor steel components, metal fences for net frame communities, all kinds of cast iron parts and other metal products, etc., can also be used for maintenance repair protective primer.


Product Detail

Product Tags

微信图片_20200611150908
HTB1FI9VxDdYBeNkSmLyq6xfnVXab.jpg_.webp
微信图片_2020080610301327
2-hydroxy-3-naphthoic acid67
2-hydroxy-3-naphthoic acid79
packing

Application

Technical data Colour assorted

Surface dry (50% humidity) 15℃C<1h; 25'<0.5h

Solid dry (50% humidity) 15℃C<48h;25℃C<24h

Impulse (ki.cm) 50

Water (50±5μm) 72h paint film does not blister, does not fall off, does not rust.

Ze ≥70%

Adherence (Hundred Rules) Level 1

Surface treatment The surface of the coated material should be free of moisture, oil, acid and ash.

Steel with oxide skin: Shot blasting and other methods such as fine sand to 5a2.5 grade, sand blasting can not be processed where mechanical polishing or

Chemically treated to remove all floating broken shoulders.

Steel without oxide skin: blasted to Sa2.5, sanded to St3 with air or electric grinding tools.

Welding, flame cutting or pyro correcting burned areas: grind to St3.

Substrate with old paint film: remove loose old paint film and rust, sand to St3 with air or electric sanding tools.

 

HTB1llpYaIfrK1RkSmLyq6xGApXaG.jpg_.webp
HTB1wXRSKxYaK1RjSZFnq6y80pXaj.jpg_.webp
HTB1WYDhazLuK1Rjy0Fhq6xpdFXaj.jpg_.webp
HTB1TEQQRVXXXXcyXXXXq6xXFXXX8.jpg_.webp
1575968797569054
H4dbfbf1b044f420996775a9e8b1b5056y

Quick Details

Welding, flame cutting or pyro correcting burned areas: grind to St3.

Substrate with old paint film: remove loose old paint film and rust, sand to St3 with air or electric sanding tools.

Typical coating package can be used with H901 waterborne antirust paint, can also be used alone as a general decorative surface paint, and can also be used with other types of bottom marine products (need to be matched to verify).

Dry (50% humidity) 15°C<48h; 25'<24h

Construction data Table dry (50% blending degree) 15℃℃<1h;25℃<0.5h 0.12-0.2kg/z'(dry film 35μm)

Density approx. 1.1-1.20g/om) Theoretical coating rate

It is recommended to apply 2 coats, which can be applied in the way of warm touching temperature to ensure dryness of 40-60μm.

To be sanded and finished with sandpaper.

验厂报告
仓库一角

Construction method: sprouting and brushing can be applied. Before use, mix the paint evenly, adjust the viscosity according to the construction method, add 5-15V water. Add 5-15V of water and mix evenly, then leave the surface without bubbles.

Construction environment 1. The construction site should have good ventilation and dust removal facilities to ensure construction quality.

2. The construction temperature should be above 5℃ and ambient relative humidity should be <70%.

3. The substrate mix shall be not less than 5 °C and shall be more than 3 °C above the air dew point temperature.

Caution and other data are the same as for "H901 waterborne antirust paint", please refer.

lightfastness

 

Vehicle Type 100% Acrylic Latex
COMPOSITION  (nominal) Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.Blinder : Acrylic Emulsion.

Solvent : Water.

Volume Solids 31.8%
Coverage per Gallon at Recommended Film Thickness  400 –450 Sq. Ft. (37-42 m2)
Recommended Film Thickness(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) Dry 1.2 milsWet 3.8 mils
Dry Time @ 77° F (25° C) @ 50% RH(High humidity and cool temperatures will result in longer dry, recoat and service times.) To Touch 1 HourTo Recoat 2 to 4 Hours
Dries By Evaporation, Coalescence
Viscosity 99 ± 2 KU
Gloss / Sheen Flat (5-10 @ 85°)

 

 

Shipping time by Sea (Just for reference)

North America

11~30 days North Africa 20~40 days Europe 22~45 days South-east Asia 7~10 days
South America 25~35 days WestAfrica 30~60 days MiddleEast 15~30 days East Asia 2~3 days
Middle America 20~35 days EestAfrica 23~30 days Ocenia 15~20 days South Asia 10~25 days

 

N,N-Diethylaniline
环保废气处理设备
生产高速分散机

FAQ

1.About Sample

We provide free sample for testing.

2.OEM,ODM service available.

3.According to customer's request, packed with pallet or without pallet.

Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.

IMG_0002
危险品证书
packing
1589443601325130
耐磨耗试验机
微信图片_20200805093655
微信图片_202008050937531
微信图片_202008050937532

  • Previous:
  • Next:

  • Write your message here and send it to us