Mit-ivy-metaalmetaal Gevorderde akriel-latex-afdichtingsonderlaag met uitstekende indringende krag
Toepassing
Dit het 'n uitstekende aanhegting aan staalondergronde en soortgelyke ondergrondse waterbasis, en het uitstekende fisiese en meganiese eienskappe nadat die verfgolf droog is.
5. Die verffilm het uitstekende ligbehoud en kleurbewaring na droog.
Aanbevole toepassing Dit is geskik vir dreineringsbeskerming van vragmotors, masjinerie-onderdele, ligte industriële toerusting, ens., Waar hoë beskerming benodig word.
Tegniese gegewens Kleur verskillende
Oppervlakte droog (50% mengbaarheid) 15 ℃ C <1 uur ； 25'C <0,5 uur
Vaste droog (50% humiditeit) 15'C <48h; 25 ° C <24 uur
Treffers "kg.cm" 50
Water (50 ± 5μm) 72h verffilm blaas nie, help nie val nie, roes nie.
Hardheid 0,3 (dubbele slinger) meganiese eienskap toets filmdikte (23 ± 3jμm)
Hegting (Hegeliaans) Vlak 1
Oppervlaktebehandeling Die oppervlak van die bedekte materiaal moet vry wees van vog, olie, suur koolstof en as.
Vinnige besonderhede
Staal met oksiedvel: Skietstraal- of sandblaasmetodes soos verwerking tot Sa2.5-vlak, waar sandstraalwerk nie gedoen kan word nie, moet meganies gepoleer word of
Chemies behandel om alle swewende gebreekte skouers te verwyder.
Staal sonder oksiedvel: gesandstraal (geskiet) tot Sa2.5 of lug-geaktiveerde, elektriese slypgereedskap na St3.
Sweis, vlamsny of vuurwerk regstel van verbrande boogareas: maal tot St3-vlak.
Basismateriaal met ou verffilm: verwyder los ou verfdeeltjies en roes, en skuur na St3 met lug- of elektriese skuurgereedskap.
Tipiese verfverpakking kan gebruik word met H902-onderlaag op waterbasis, of alleen gebruik word as 'n algemene dekoratiewe deklaag, of saam met ander soorte onderlaagprodukte (moet ooreenstem met die verifikasie).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
