products

Epoxy iron cloud middle coating Waterborne epoxy cloud iron intermediate paint environmentally friendly

short description:

Water-based protective paints
Clean up the tools When the construction is finished, the tools should be rinsed with water immediately to prevent them from drying out, and the remaining paint should be kept in a closed container.
Note: This product should not be mixed with any oil-based paint or organic solvent. 2.
2. Avoid contacting with organic solvent and water before the paint film is completely dry, and do not press or rub heavily to avoid destruction of paint film.
Product.
Main characteristics 1. Water dilution, low VDC, safe and environmental protection. 2. High solid content, high cost performance.
3. fast drying speed, easy construction. 4. Excellent adhesion, good protective performance of paint film.
Recommended use Mainly used for industrial equipment, steel structure, civil facilities, etc., light to moderate anti-trapping, anti-flat surface coating requirements. It can also be used for maintenance repair protective primer. Suitable for anti-corrosion requirements under the general environment.


Product Detail

Product Tags

微信图片_20200806103013
HTB1FI9VxDdYBeNkSmLyq6xfnVXab.jpg_.webp
微信图片_202008061030133
仓库一角
微信图片_2020080610301331
微信图片_202008061030132

Application

Main features 1. Very low VOC, with water as diluent, environmentally friendly.

2.Non-flammable and explosive, can be transported as non-dangerous goods, safe and reliable.

3. Excellent adhesion to the primer, dense anti-penetration paint film, strong sealing performance.

4. Excellent physical and mechanical properties of paint film after drying, can be matched with all kinds of topcoats.

Technical parameters Color Gray

Solid content 60±2%

Shine No light

Drying time (25℃℃) is shown in 1 hour.

24 hours of operation

Fully cured in 7 days

Drying (70-80°C) 2 hours solid drying

Varnish hardness

Paint film adhesion level 1

Paint film flexibility 2mm

Paint film impact resistance 50cm.kg.

Theoretical coating rate 8m'/kg (dry film 40μm)

H13b0f6074ddb4893b781f4cb748d1566L.jpg_.webp
HTB1wXRSKxYaK1RjSZFnq6y80pXaj.jpg_.webp
HTB1WYDhazLuK1Rjy0Fhq6xpdFXaj.jpg_.webp
Hea54edef1b94450e88026c128b73f2b4g
1575968797569054
H4dbfbf1b044f420996775a9e8b1b5056y

Quick Details

Construction method Proportion component A: component B = 9:1

Construction method Air/airless spraying

Thinner Clean water

Dilution 5-15%

Nozzle diameter 1.5-2.5mm

Spraying pressure 0.4-0.6Mpa

Service period 3h (at 20°C)

Painting kit Select the kit system according to the requirement. This product is not recommended to be used alone, but can be used with most of our water-based or solvent-based primers and topcoats.

Packing specification: component A: 18kg/barrel, component B: 2kg/barrel.

The data of construction environment is the same as that of "H602 waterborne epoxy primer", please refer to it.

 

Hd031cc143ed042b4910abdaacde0b0cec.jpg_.webp
27e52fbb9549049db355ee507081b9a
IMG_0002
验厂报告
Hef230fa245204a01a89445508302629d3.jpg_.webp

Waterborne epoxy primer

Product Description This product is made of water-based ring carrier nozzle, water-based additives, environmentally friendly antirust filler, water-based epoxy coating agent, deionized water, etc. by special process, A, B two-component independent packaging.

Recommended use: Anti-corrosion coating on the surface of underground pipes, construction machinery, electric power facilities, mining equipment, chemical equipment, construction steel and other steel. Surface coating of automobile parts such as axles.

3. Anti-seepage coating on cement, metal products, aluminum products, FRP surface coating.

Main characteristics 1. Extremely low VOC, diluted with water, environmentally friendly products.

2. Each component is non-flammable and non-explosive, can be transported according to non-dangerous chemicals.

3. Excellent physical and mechanical properties, excellent water resistance, alkali resistance.

HTB1ST_HxhGYBuNjy0Fnq6x5lpXa9.jpg_.webp
HTB1PPqNKVXXXXbZXpXXq6xXFXXXW.jpg_.webp
Hf9c229538b6e48859b5f6602738b38bcb.jpg_.webp

4: Excellent metal corrosion resistance.

5: Excellent adhesion to various substrates, widely used.

Technical parameters Color Various colors

Solids 55±3%

Glossy No light

Drying time (25'°C) at 1 hour

Actual 24 hours

dryer

Film hardness (70-80℃) Completely cured 7 days.

2 hours of hands-on work

Paint film adhesion H

N,N-Diethylaniline
环保废气处理设备
H5ddf0e53b4aa4218a4ee26330f8d3fb5m.jpg_.webp

Steel: Surface spraying and other methods to achieve Sa2.5 grade, with medium surface roughness and stability.

Aluminum: can be mechanically polished with 120# second paper.

This product can be used for other substrates, please contact our technical service personnel for details.

IMG_0002
危险品证书
packing

Level 1

Paint film flexibility

Paint film impact resistance

Salt fog resistance 2mm

50cm. kg

Theoretical coating rate 300h

8e1/kg (40μm dry film)

Construction method Proportioning

Construction method Component A:Component B=2:1

Air spray/airless spray

thinner

Dilution amount Clean water

5-15% of the total

Nozzle size

Spraying pressure 1.5-2.5mm

Applicable period 0.4-0.6Mpa

3h (at 20°C)

Surface treatment Before construction, the surface of the coated material should be treated without oil, rust and dust.

 

微信图片_20200611150908
2-hydroxy-3-naphthoic acid67
微信图片_20200805093655
微信图片_202008050937531
微信图片_202008050937532

  • Previous:
  • Next:

  • Write your message here and send it to us