products

Epoxy anti-corrosion primer waterborne epoxy primer topcoat Extremely low VOC diluted with water

short description:

Waterborne epoxy primer
Product Description This product is made of water-based ring carrier nozzle, water-based additives, environmentally friendly antirust filler, water-based epoxy coating agent, deionized water, etc. by special process, A, B two-component independent packaging.
Recommended use: Anti-corrosion coating on the surface of underground pipes, construction machinery, electric power facilities, mining equipment, chemical equipment, construction steel and other steel. Surface coating of automobile parts such as axles.
3. Anti-seepage coating on cement, metal products, aluminum products, FRP surface coating.
Main characteristics 1. Extremely low VOC, diluted with water, environmentally friendly products.
2. Each component is non-flammable and non-explosive, can be transported according to non-dangerous chemicals.


Product Detail

Product Tags

HTB1WYDhazLuK1Rjy0Fhq6xpdFXaj.jpg_.webp
H13b0f6074ddb4893b781f4cb748d1566L.jpg_.webp
Hf9c229538b6e48859b5f6602738b38bcb.jpg_.webp
H5ddf0e53b4aa4218a4ee26330f8d3fb5m.jpg_.webp
H74d1d7dccef24695801cdadc4f2fce399.jpg_.webp
微信图片_2020080610301318

Application

Main characteristics 1. Extremely low VOC, diluted with water, environmentally friendly products.

2. Each component is non-flammable and non-explosive, can be transported according to non-dangerous chemicals.

3. Excellent physical and mechanical properties, excellent water resistance, alkali resistance.

4: Excellent metal corrosion resistance.

5: Excellent adhesion to various substrates, widely used.

Technical parameters Color Various colors

Solids 55±3%

Glossy No light

Drying time (25'°C) at 1 hour

Actual 24 hours

dryer

Film hardness (70-80℃) Completely cured 7 days.

2 hours of hands-on work

Paint film adhesion H

Level 1

Paint film flexibility

Paint film impact resistance

Salt fog resistance 2mm

50cm. kg

Theoretical coating rate 300h

8e1/kg (40μm dry film)

Construction method Proportioning

Construction method Component A:Component B=2:1

Air spray/airless spray

thinner

Dilution amount Clean water

5-15% of the total

Nozzle size

Spraying pressure 1.5-2.5mm

Applicable period 0.4-0.6Mpa

3h (at 20°C)

Surface treatment Before construction, the surface of the coated material should be treated without oil, rust and dust.

Steel: Surface spraying and other methods to achieve Sa2.5 grade, with medium surface roughness and stability.

 

H592047f04a9540b684c562e527de276dk.jpg_.webp
H7544328f2af34480a29ab0d6f61e6bffh.jpg_.webp
2-hydroxy-3-naphthoic acid67
微信图片_2020080610301331
1575968797569054
H4dbfbf1b044f420996775a9e8b1b5056y

Quick Details

Hd031cc143ed042b4910abdaacde0b0cec.jpg_.webp
27e52fbb9549049db355ee507081b9a
IMG_0002

Waterborne epoxy primer

Construction environment Construction temperature 10℃C-40℃.

Relative humidity ≤70%

Substrate temperature 5°C above dew point

Well ventilated. There must be a combination of positive and negative air pressures.

Cleanliness Dust-free

1. This product should not be mixed with any oil-based paint or organic solvent. 2.

2. the curing agents used for different paints should not be mixed.

3. It is forbidden to contact with acid and alkali in the process of paint preparation and coating. 4.

4. Wear the necessary protective equipment at the construction site.

5、After the curing agent is prepared for this series of products, it should be used within the applicable period under the condition that there is no pollution.

You cannot use it.

Typical painting kit Select the matching system according to the requirement. This product can be used alone or in combination with most of our water-based medium and top coats.

Steel: Surface spraying and other methods to achieve Sa2.5 grade, with medium surface roughness and stability.

Aluminum: can be mechanically polished with 120# second paper.

This product can be used for other substrates, please contact our technical service personnel for details.

验厂报告
10971655454_1346530587

Storage: 12 months (indoor dry and ventilated place 5-40), after this period, it can still be used after passing the test.

Package A: 14kg/barrel B: 7kg/barrel

Waterborne epoxy top coat

Product Description This product is made of water-based environmental protection materials, water-based materials, environmental protection anti-rust air filler, water-based environmental enveloping agent, deionized water, etc. It is prepared by the phase room process, A, B two-component independent packaging.

Machine tool accessories, pipeline valves and other industrial equipment, indoor decorative surface coating protection. 2.

2. decorative top coating for hardware and wood products.

Main features Very low vOC, diluted with water, environmentally friendly products.

The components are non-flammable and non-explosive, and can be transported as non-dangerous chemicals. 3.

(3) Excellent adhesion to various primers and primers, excellent physical and mechanical properties, good decorative appearance.

(4) The paint film has good resistance to oil, water, salt water and alkali.

Technical parameters Color Various colors

Solid content 55±3%

Gloss 60-80%

Drying time (25°C) is shown in 1 hour.

HTB1ST_HxhGYBuNjy0Fnq6x5lpXa9.jpg_.webp
HTB1PPqNKVXXXXbZXpXXq6xXFXXXW.jpg_.webp
H44e615a6a00e450b8fb9451cd0fb0d3cr.png_.webp

24 hours of operation

Fully cured in 7 days

Dry (70-80°C) 2 hours dry

Film hardness H

Paint film adhesion level 1

Paint film flexibility 2mm

Impact resistance of paint film 50cm. kg.

Theoretical coating rate 7e?/kg (dry film 40 μm)

Construction method Proportion: component A:component B=1:1

Construction method: air spraying

Thinner Clean water

dilution

5-15% of the total

Nozzle size

Spraying pressure 1.5-2.5mm

0.4-0.6Mon

Suitable period 2h (at 20°C C)

Surface treatment Before construction, the surface should be treated without oil, rust and dust.

The front paint film should be dry, and the old paint film should be polished and cleaned of dirt.

This product can be used for other substrates, please consult our technical service personnel for details.

Packing specification A component: 18kg/barrel B component: 18lkg/yang.

N,N-Diethylaniline
环保废气处理设备
Hcf2642af0cf641d1816dddb1171cb7d2w.jpg_.webp
IMG_0002
危险品证书
packing
微信图片_20200611150908
H04d60ad774c3480ab6e5fb487ae80bb61.jpg_.webp (1)
微信图片_20200805093655
微信图片_202008050937531
微信图片_202008050937532

  • Previous:
  • Next:

  • Write your message here and send it to us