Epoxy iron cloud middle coating Waterborne epoxy cloud iron intermediate paint environmentally friendly
Main features 1. Very low VOC, with water as diluent, environmentally friendly.
2.Non-flammable and explosive, can be transported as non-dangerous goods, safe and reliable.
3. Excellent adhesion to the primer, dense anti-penetration paint film, strong sealing performance.
4. Excellent physical and mechanical properties of paint film after drying, can be matched with all kinds of topcoats.
Technical parameters Color Gray
Solid content 60±2%
Shine No light
Drying time (25℃℃) is shown in 1 hour.
24 hours of operation
Fully cured in 7 days
Drying (70-80°C) 2 hours solid drying
Paint film adhesion level 1
Paint film flexibility 2mm
Paint film impact resistance 50cm.kg.
Theoretical coating rate 8m'/kg (dry film 40μm)
Construction method Proportion component A: component B = 9:1
Construction method Air/airless spraying
Thinner Clean water
Nozzle diameter 1.5-2.5mm
Spraying pressure 0.4-0.6Mpa
Service period 3h (at 20°C)
Painting kit Select the kit system according to the requirement. This product is not recommended to be used alone, but can be used with most of our water-based or solvent-based primers and topcoats.
Packing specification: component A: 18kg/barrel, component B: 2kg/barrel.
The data of construction environment is the same as that of "H602 waterborne epoxy primer", please refer to it.
Waterborne epoxy primer
Product Description This product is made of water-based ring carrier nozzle, water-based additives, environmentally friendly antirust filler, water-based epoxy coating agent, deionized water, etc. by special process, A, B two-component independent packaging.
Recommended use: Anti-corrosion coating on the surface of underground pipes, construction machinery, electric power facilities, mining equipment, chemical equipment, construction steel and other steel. Surface coating of automobile parts such as axles.
3. Anti-seepage coating on cement, metal products, aluminum products, FRP surface coating.
Main characteristics 1. Extremely low VOC, diluted with water, environmentally friendly products.
2. Each component is non-flammable and non-explosive, can be transported according to non-dangerous chemicals.
3. Excellent physical and mechanical properties, excellent water resistance, alkali resistance.
4: Excellent metal corrosion resistance.
5: Excellent adhesion to various substrates, widely used.
Technical parameters Color Various colors
Glossy No light
Drying time (25'°C) at 1 hour
Actual 24 hours
Film hardness (70-80℃) Completely cured 7 days.
2 hours of hands-on work
Paint film adhesion H
Steel: Surface spraying and other methods to achieve Sa2.5 grade, with medium surface roughness and stability.
Aluminum: can be mechanically polished with 120# second paper.
This product can be used for other substrates, please contact our technical service personnel for details.
Paint film flexibility
Paint film impact resistance
Salt fog resistance 2mm
Theoretical coating rate 300h
8e1/kg (40μm dry film)
Construction method Proportioning
Construction method Component A：Component B=2:1
Air spray/airless spray
Dilution amount Clean water
5-15% of the total
Spraying pressure 1.5-2.5mm
Applicable period 0.4-0.6Mpa
3h (at 20°C)
Surface treatment Before construction, the surface of the coated material should be treated without oil, rust and dust.