Mit-ivy masana'antu karfe Advanced Acrylic Latex Sealing Primer tare da kyakkyawar ƙarfin ratsa jiki
Aikace-aikacen
Yana da kyakkyawar mannewa zuwa kayan karafan karfe da makamantan kayan masarufi irin na ruwa, da kyawawan halaye na zahiri da na injina bayan kalaman fenti sun bushe.
5. Fentin fim yana da kyakkyawar kiyaye haske da kiyaye launi bayan bushewa.
Amintaccen aikace-aikacen Ya dace da kariya daga magudanar motoci, sassan injuna, kayan aikin masana'antu mai haske, da sauransu inda ake buƙatar babban kariya.
Bayanan fasaha Launi hade
Dryasa ya bushe (50% kuskure) 15 ℃ C <1h ； 25'C <0.5h
M bushe (50% zafi) 15'C <48h; 25 ° C <24h
Buga "kg.cm" 50
Ruwa (50 ± 5μm) fim na fenti 72h ba ya yin blister, ba ya taimaka faɗuwa, ba tsatsa.
Hardness 0.3 (pendulum biyu) kayan gwajin kayan kayan inji (23 ± 3jμm)
Adhesion (Hegelian) Mataki na 1
Farfajiyar farfajiyar farfajiyar abu ya kamata ya zama ba shi da danshi, mai, carbon acid da toka.
Saurin bayani
Karfe da fata na oxide: Bugun iska ko hanyoyin fashewar yashi kamar sarrafawa zuwa matakin Sa2.5, inda ba za a iya yin fashewar yashi ba dole a goge shi ta hanyar inji ko
Chemically bi da su cire duk iyo karya karaya kafadu.
Karfe ba tare da fatar oxide ba: sandblasted (shotblasted) zuwa Sa2.5 ko kunna iska, kayan aikin nika na lantarki zuwa St3.
Welding, yanke-yanke ko gyaran wuta na wuraren da aka kona: nika zuwa matakin St3.
Kayan tushe tare da tsohuwar fim mai fenti: cire tsofaffin fentin fenti da tsatsa, da yashi zuwa St3 tare da iska ko sanding kayan aikin sanding.
Ana iya amfani da kunshin zanen al'ada tare da share fage na ruwa na H902, ko amfani da shi azaman babban kayan ado na sama, ko amfani da wasu nau'ikan samfuran share fage (ana buƙatar dace da su don tabbatarwa).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
