Mit-ivy makampani azitsulo Zapamwamba za Acrylic Latex Sealing Primer yokhala ndi mphamvu yayikulu yolowera
Ntchito
Ili ndi guluu wolimba kwambiri pazitsulo zazitsulo komanso zotengera zamadzi zofananira, komanso mawonekedwe abwino athupi ndi mawotchi pambuyo pouma utoto.
5. Kanemayo ali ndi utoto wabwino kwambiri komanso amasunga utoto utayanika.
Ndondomeko yogwiritsira ntchito Ndioyenera kuteteza ngalande zamagalimoto, zida zama makina, zida zopangira mafakitale, ndi zina zambiri pomwe pamafunika chitetezo chokwanira.
Luso lachidziwitso Mtundu wosakaniza
Malo owuma (50% miscibility) 15 ℃ C <1h ； 25'C <0.5h
Olimba (50% chinyezi) 15'C <48h; 25 ° C <24h
Kumenya "kg.cm" 50
Madzi (50 ± 5μm) 72h utoto filimu si chithuza, osati kuthandiza kugwa, osati dzimbiri.
Kulimbikira 0.3 (kawiri pendulum) makina oyesa kuyesa makulidwe amakanema (23 ± 3jμm)
Mzere 1 (Adhesion (Hegelian)
Chithandizo cham'mwamba Pamwamba pazokutira chikuyenera kukhala chopanda chinyezi, mafuta, mpweya wa asidi ndi phulusa.
Zambiri
Zitsulo ndi khungu okusayidi: kuwombera kabotolo kapena mchenga zikutchinga njira monga processing kwa Sa2.5 mlingo, kumene mchenga zikutchinga sangakhoze kuchitidwa ayenera umakaniko opukutidwa kapena
Amathandizidwa ndimankhwala kuchotsa mapewa onse oyandama osweka.
Chitsulo chopanda khungu la oksidi: chopangidwa ndi mchenga (chowomberedwa) ku Sa2.5 kapena zida zamagetsi, zida zopangira magetsi ku St3.
Kuwotcherera, kudula lamoto kapena kukonza makombola m'malo opsereza: kugaya pamlingo wa St3.
Zinthu zoyambira ndi filimu yakale yopaka: chotsani utoto wakale ndi dzimbiri, ndi mchenga ku St3 wokhala ndi zida zamagetsi zamagetsi kapena zamagetsi.
Phukusi lojambulidwa limatha kugwiritsidwa ntchito ndi choyambira pamadzi cha H902, kapena chimagwiritsidwa ntchito chokhacho ngati chovala chokongoletsera, kapena chogwiritsidwa ntchito ndi mitundu ina yazinthu zoyambira (zimayenera kufananizidwa kuti zitsimikizidwe).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
