Mit-ivy metal metal Advanced Acrylic Latex Sealing Primer kalayan kakuatan tembus anu hadé
Lamaran
Éta ngagaduhan caket anu hadé pikeun substrat waja sareng bahan dasar cai anu sami, sareng sipat fisik sareng mékanis anu saé saatos gelombang cet garing.
5. Pilem cet ngagaduhan pelestarian cahaya sareng pelestarian warna anu saé saatos garing.
Aplikasi anu disarankeun Éta cocog pikeun panangtayungan drainase truk, bagian mesin, alat-alat industri ringan, sareng sajabana anu diperyogikeun perlindungan tinggi.
Data téknis Warna rupa-rupa
Surface garing (50% miscibility) 15 ℃ C <1h ； 25'C <0,5h
Garing garing (kalembaban 50%) 15'C <48h; 25 ° C <24h
Hit "kg.cm" 50
Cai (50 ± 5μm) pilem cet 72h henteu leuleuy, henteu ngabantosan murag, henteu keyeng.
Héséna 0,3 (pendil ganda) kandel pilem uji sipat mékanis (23 ± 3jμm)
Adhesion (Hegelian) Level 1
Perlakuan permukaan Permukaan bahan dilapis kedah bébas tina kalembaban, minyak, karbon asam sareng lebu.
Rincian Gancang
Baja sareng kulit oksida: Blasting shot atanapi metode blasting keusik sapertos ngolah dugi ka tingkat Sa2.5, dimana blasting keusik teu tiasa dilakukeun kedah didamel sacara mékanis atanapi
Diubaran sacara kimia pikeun ngaleungitkeun sagala taktak rusak anu ngambang.
Baja tanpa kulit oksida: didedetkeun (ditémbak) kana Sa2.5 atanapi diaktipkeun ku udara, alat grinding listrik ka St3.
Las, motong seuneu atanapi koréksi kembang api di daérah lengkungan anu kabakar: grinding dugi ka tingkat St3.
Bahan dasar sareng pilem cet lami: nyabut partikel cet anu lami sareng karat, sareng pasir ka St3 nganggo alat-alat sanding hawa atanapi listrik.
Paket lukisan anu biasa tiasa dianggo nganggo dasar cai dumasar H902, atanapi dianggo nyalira salaku topcoat hiasan umum, atanapi dianggo sareng jinis produk primér anu sanés (kedah dicocogkeun kanggo verifikasi).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
