Chuma cha tasnia ya Mit-ivy Advanced Acrylic Latex Sealing Primer na nguvu bora ya kupenya
Matumizi
Inayo mshikamano bora kwa sehemu ndogo za chuma na vichocheo sawa vya msingi wa maji, na mali bora ya mwili na mitambo baada ya wimbi la rangi kukauka.
5. Filamu ya rangi ina uhifadhi bora wa nuru na uhifadhi wa rangi baada ya kukausha.
Maombi yaliyopendekezwa yanafaa kwa ulinzi wa mifereji ya maji ya malori, sehemu za mashine, vifaa vya viwandani nyepesi, nk ambapo ulinzi mkubwa unahitajika.
Takwimu za kiufundi Rangi imeunganishwa
Uso kavu (50% miscibility) 15 ℃ C <1h ; 25'C <0.5h
Kavu (50% unyevu) 15'C <48h; 25 ° C <24h
Hits "kg.cm" 50
Maji (50 ± 5μm) 72h filamu ya rangi haina malengelenge, haisaidii kuanguka, sio kutu.
Ugumu 0.3 (pendulum mara mbili) unene wa upimaji wa filamu (23 ± 3jμm)
Kiwango cha 1 cha kujitoa (Hegelian)
Matibabu ya uso Uso wa nyenzo iliyofunikwa haifai kuwa na unyevu, mafuta, kaboni ya asidi na majivu.
Maelezo ya haraka
Chuma kilicho na ngozi ya oksidi: Njia za ulipuaji wa risasi au njia ya ulipuaji mchanga kama vile kusindika kwa kiwango cha Sa2.5, ambapo ulipuaji wa mchanga hauwezi kufanywa inapaswa kusaga
Kutibiwa kwa kemikali kuondoa mabega yote yaliyoelea yaliyovunjika.
Chuma bila ngozi ya oksidi: iliyochomwa mchanga (iliyopigwa risasi) kwa Sa2.5 au vifaa vya kusaga vya umeme, vifaa vya umeme kwa St3.
Kulehemu, kukata moto au marekebisho ya firework ya maeneo ya upinde wa kuteketezwa: kusaga kwa kiwango cha St3.
Vifaa vya msingi na filamu ya zamani ya rangi: ondoa chembe za rangi za zamani na kutu, na mchanga hadi St3 na zana za mchanga au umeme.
Kifurushi cha kawaida cha uchoraji kinaweza kutumiwa na msingi wa maji H902, au kutumiwa peke yake kama koti ya mapambo ya jumla, au kutumiwa na aina zingine za bidhaa za mwanzo (zinahitaji kuendana kwa uthibitishaji).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
Vehicle Type | 100% Acrylic Latex | |
COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
Volume Solids | 31.8% | |
Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
Dries By | Evaporation, Coalescence | |
Viscosity | 99 ± 2 KU | |
Gloss / Sheen | Flat (5-10 @ 85°) |
Shipping time by Sea (Just for reference) | ||||||||
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.