-
2-Methoxyethanol CAS 109-86-4
Ethylene glycol monomethyl ether (abbreviated as MOE), also known as ethylene glycol methyl ether, is a colorless and transparent liquid, miscible with water, alcohol, acetic acid, acetone and DMF. As an important solvent, MOE is widely used as a solvent for various greases, cellulose acetates, cellulose nitrates, alcohol-soluble dyes and synthetic resins.
It is obtained by the reaction of ethylene oxide and methanol. Add methanol to the boron trifluoride ether complex, and pass in ethylene oxide at 25-30°C while stirring. After the passage is completed, the temperature automatically rises to 38-45°C. The resulting reaction solution is treated with potassium hydrocyanide- Neutralize the methanol solution to pH=8-Chemicalbook9. Recover methanol, distill it, and collect the fractions before 130°C to obtain the crude product. Then carry out fractional distillation, and collect the 123-125°C fraction as the finished product. In industrial production, ethylene oxide and anhydrous methanol are reacted at high temperature and pressure without a catalyst, and a high yield product can be obtained。
This product is used as a solvent for various oils, lignin, nitrocellulose, cellulose acetate, alcohol-soluble dyes and synthetic resins; as a reagent for the determination of iron, sulfate and carbon disulfide, as a diluent for coatings, and for cellophane. In packaging sealers, quick-drying varnishes and enamels. It can also be used as a penetrating agent and leveling agent in the dye industry, or as a plasticizer and brightener. As an intermediate in the production of organic compounds, ethylene glycol monomethyl ether is mainly used in the synthesis of acetate and ethylene glycol dimethyl ether. It is also a Chemicalbook raw material for the production of bis(2-methoxyethyl)phthalate plasticizer. The mixture of ethylene glycol monomethyl ether and glycerin (ether: glycerin = 98:2) is a military jet fuel additive that can prevent icing and bacterial corrosion. When ethylene glycol monomethyl ether is used as a jet fuel antisizing agent, the general addition amount is 0.15% ± 0.05%. It has good hydrophilicity. It uses its own hydroxyl group in the fuel to interact with the trace amounts of water molecules in the oil. The formation of hydrogen bond association, coupled with its very low freezing point, lowers the freezing point of water in the oil, allowing the water to precipitate into ice. Ethylene glycol monomethyl ether is also an anti-microbial additive.
-
1,4-Butanediol diglycidyl ether CAS 2425-79-8
1,4-Butanediol glycidyl ether, also known as 1,4-butanediol dialkyl ether or BDG, is an organic compound . It is a colorless to light yellow liquid with low volatility. It is soluble in most organic solvents such as ethanol, methanol and dimethylformamide. Commonly used as chemical raw materials and solvents. It is also used as a stabilizer for dyes and pigments.
1,4-Butanediol glycidyl ether can be produced by esterification of 1,4-butanediol with methanol or methanol solution. The reaction conditions are generally carried out under high pressure and in the presence of a catalyst.
When using 1,4-butanediol glycidyl ether, care must be taken to prevent contact with skin and eyes. During use and storage, high temperatures and sources of fire should be avoided. Attention should be paid to the sealing of storage containers to prevent evaporation and leakage. -
Diethanolamine CAS: 111-42-2
Ethanolamine EA is the most important product in ethanol, including monoethanolamine MEA, diethanolamine DEA and triethanolamine TEA. Ethanolamine is an important organic intermediate, widely used in surfactants, synthetic detergents, petrochemical additives, synthetic resin and rubber plasticizers, accelerators, vulcanizing agents and foaming agents, as well as gas purification, liquid antifreeze, Printing and dyeing, medicine, pesticides, construction, military industry and other fields. The downstream products of ethanolamine are important fine chemical intermediates.
Diethanolamine, also known as bishydroxyethylamine and 2,2′-iminobisethanol, is a white crystal or colorless liquid with strong hygroscopicity. It is easily soluble in water, methanol, ethanol, acetone and benzene. Its solubility (g/100g) in benzene at 25°C is 4.2 and in ether is 0.8. Its purpose is: gas purifier, which can absorb Chemicalbook acidic gases in the gas, such as carbon dioxide, hydrogen sulfide, sulfur dioxide, etc. The "Benfield" solution used in the synthetic ammonia industry is mainly composed of this product; it is also used for emulsification. Agents, lubricants, shampoos, thickeners, etc.; organic synthesis intermediates, used to produce detergent raw materials, preservatives and daily chemicals (such as surfactants); synthesis of morpholine.
Diethanolamine is used as a raw material for buffers in the pharmaceutical industry. It is used as a cross-linking agent in the production of high-resilience polyurethane foam. It is mixed with triethanolamine as a detergent for aircraft engine pistons. It reacts with fatty acids to form alkyl alkyls. It is also used in organic Synthetic raw materials, raw materials for surfactants Chemicalbook and acid gas absorbers, used as thickeners and foam modifiers in shampoos and light detergents, as intermediates in the organic synthesis industry, and in the pharmaceutical industry. As a solvent, it is widely used in the washing industry, cosmetics industry, agriculture, construction industry and metal industry.
-
2-Acrylamide-2-methylpropanesulfonic acid CAS 15214-89-8
2-Acrylamide-2-methylpropanesulfonic acid (AMPS) is a vinyl monomer with a sulfonic acid group. It has good thermal stability, with a decomposition temperature up to 210°C, and its sodium salt homopolymer has a decomposition temperature up to 329°C. In aqueous solution, the hydrolysis rate is slow, and sodium salt solution has excellent hydrolysis resistance under high pH conditions. Under acidic conditions, the hydrolysis resistance of its copolymer is much higher than that of polyacrylamide. The monomer can be made into crystals or into an aqueous solution of sodium salt. 2-Acrylamide-2-methylpropanesulfonic acid has good complexing properties, adsorption properties, biological activity, surface activity, hydrolysis stability and thermal stability.
Usage
1. Water treatment: The homopolymer of AMPS monomer or copolymer with acrylamide, acrylic acid and other monomers can be used as a sludge dehydrating agent in the sewage purification process, and can be used as iron, zinc, aluminum, and copper in closed water circulation systems. As well as corrosion inhibitors for alloys; it can also be used as descaling and antiscaling agents for heaters, cooling towers, air purifiers and gas purifiers.
2. Oilfield chemistry: The application of products in the field of oilfield chemistry is developing rapidly. The scope of involvement includes oil well cement admixtures, drilling fluid treatment agents, acidizing fluids, fracturing fluids, completion fluids and workover fluid additives, etc.
3. Synthetic fibers: AMPS is an important monomer that improves the comprehensive properties of some synthetic fibers, especially acrylic or acrylic fibers. Its dosage is 1% -4% of the fiber, which can significantly improve the whiteness and dyeability of the fiber. , antistatic, breathable and flame retardant.
4. Sizing for textiles: A copolymer of 2-acrylamido-2-methylpropanesulfonic acid, ethyl acetate, and acrylic acid. It is an ideal sizing agent for cotton and polyester blended fabrics. It is easy to use and easy to remove with water. Features.
5. Papermaking: The copolymer of 2-acrylamide-2-methylpropanesulfonic acid and other water-soluble monomers is an indispensable chemical for various paper mills. It can be used as a drainage aid, a sizing agent, and increases The strength of paper and also serves as a pigment dispersant for color coatings
-
(2-CARBOXYETHYL)DIMETHYLSULFONIUM CHLORIDE CAS: 4337-33-1
DMPT is the most effective fourth-generation aquatic food attractant discovered so far. Some people use the term "fish bites stones" to vividly describe its food attractant effect - even if it is painted on a stone, fish will bite it. Stone. The most typical use of DMPT is as fishing bait to improve the bait's attractiveness and make it easier for fish to bite the hook. The industrial use of DMPT is as a green aquatic feed additive to promote feed intake of aquatic animals and increase their growth rate.
The earliest dimethyl-beta-propionate thiatin is a pure natural compound extracted from seaweed. In fact, the process of discovering dimethyl-beta-propionate thiatin also started from seaweed: scientists observed that seawater fish I like to eat seaweed, so I started to study the food-attracting factors in seaweed. Later I found that the reason why fish like to eat seaweed is that seaweed contains natural DMPT.
-
N,N-Diethylhydroxylamine CAS:3710-84-7
N,N-Diethylhydroxylamine CAS:3710-84-7
chemical properties
Colorless transparent liquid. It smells like ammonia. Easily soluble in water, soluble in ethanol, ether, chloroform, benzene.
It is used as olefin polymerization inhibitor, terminal polymerization inhibitor, and as vinyl monomer in the production process of synthetic rubber. As an antioxidant and stabilizer, it can be widely used in photosensitive resins, photosensitive emulsions, synthetic latex, etc. It can also be used as a terminator for emulsion polymerization, photochemical smog inhibitor, etc. This sulfate is a tone balancing agent for color development.
Packaging, storage and transportation
Packed in plastic liner barrels or resin barrels. This product should be stored sealed in a cool, dry warehouse and protected from fire. -
Dipropylamine CAS No.：142-84-7
Dipropylamine, also known as di-n-propylamine, is a flammable, highly toxic corrosive liquid that exists in nature in tobacco leaves and artificially discharged industrial waste.
Di-n-propylamine is a colorless and transparent liquid. There is an ammonia smell. Can form hydrates. Easily soluble in water, ethanol and ether. Forms hydrate with water. Density 0.738, melting point -63℃, boiling point 110℃, flash point 17℃, refractive index 1.40445。
Di-n-propylamine can be used as a solvent and an intermediate in the production of pharmaceuticals, pesticides, dyes, mineral flotation agents, emulsifiers and fine chemicals. The preparation method is to use propanol as raw material, and obtain it through catalytic dehydrogenation, ammoniation, dehydration and hydrogenation. The reaction catalyst is Ni-Cu-Al2O3, the pressure is (39±1)kPa, the reactor temperature is (Chemicalbook190±10)℃, the space velocity of propanol is 0.05~0.15h-1, and the raw material ratio is propanol:ammonia ∶Hydrogen = 4:2:4, dipropylamine and tripropylamine are obtained at the same time, and dipropylamine can be obtained by fractionation. -
Diethylenetriaminepentaacetic acid CAS: 67-43-6
Diethylenetriaminepentaacetic acid CAS: 67-43-6
Diethylenetriaminepentacetic acid (DTPA), also called diethylenetriaminepentacetic acid, is an excellent aminocarboxylic complexing agent with strong chelating properties. The complex it forms with most cations is better than that of ethylenediaminetetraacetic acid. The corresponding chelate should be stable。
As a high-efficiency chelating agent, diethylene triamine pentaacetic acid can be used in color inhibitors in acrylic fiber production, paper industry, water softeners, textile auxiliaries, chelating titrants, color photography and food industries. It is also used in medical, rare earth elements It is also widely used in separation and agricultural production.
This product is white crystal or crystalline powder. Melting point 230 ℃ (decomposition), soluble in hot water and alkali solution, slightly soluble in cold water, insoluble in organic solvents such as alcohol ethers。 -
DIALLYL ISOPHTHALATE CAS: 1087-21-4
DIALLYL ISOPHTHALATE CAS: 1087-21-4，Also known as level four reagent。Belongs to propyl ester compounds。
Diallyl isophthalate polymers are very similar in preparation, properties and applications to the diallyl isophthalate polymers described above. Moldings based on diallyl isophthalate are more expensive but offer enhanced thermal stability (can withstand temperatures up to approximately 220°C for long periods of time) and resistance to organic solvents.
It is a light yellow oily liquid. Slightly smelly. Miscible with ethanol, insoluble in water.
Mainly used for biochemical research. Organic Synthesis. Preparation of high temperature resin。 -
N,N-Bis(2-cyanoethyl)aniline CAS: 1555-66-4
N,N-Bis(2-cyanoethyl)aniline CAS: 1555-66-4
White crystal powder. Easily soluble in organic solvents, dilute acids and dilute alkali, but insoluble in water. Used as dye intermediate。
-
N,N-Dimethylbenzylamine CAS: 103-83-3
N,N-Dimethylbenzylamine CAS: 103-83-3
N,N-dimethylbenzylamine is often used as a reagent in organic synthesis and as a catalyst for the synthesis of polyurethane foam and epoxy resin. It reacts with Os3(CO) to form a triosmium cluster.
N,N dimethylbenzylamine in methanol-tetra-N-butyl ammonium fluoroborate and methanol-potassium hydroxide. Used in the synthesis of bis[(N,N-dimethylamino)benzyl]selenoether. It can also be used as an organic synthesis intermediate, dehydrogenation catalyst, preservative, acid neutralizer, etc.
It is colorless to light yellow flammable liquid. It smells like ammonia. Easily soluble in ethanol and ether, hardly soluble in water.
-
4-Methyldiphenylamine CAS: 620-84-8
4-Methyldiphenylamine CAS: 620-84-8
Organic raw materials: cycloalkylamines, aromatic monoamines, aromatic polyamines and their derivatives and salts。Appearance is white crystal。Mainly used for organic synthesis intermediates, synthesis of organic functional materials and medicines, as well as photochemistry and liquid crystal intermediates. Insoluble in water. Soluble in benzene, toluene,methanol, ethanol。 for the storage condition ,Keep in dark place,Sealed in dry,Room Temperature.
